New Hot 1Pair NdFeB Sintered Double Ball Motor For Nerf Stryfe/Nerf Rapidstrike CS-18/Worker Swordfish Gun Toy Parts Titanium

1Pair Worker NdFeB Sintered Double Ball Motor for Nerf Stryfe/Nerf Rapidstrike CS-18/Worker Swordfish – Titanium

Features:

.100% brand new with high quality
.Small motor power, fast start launch, continuous high-speed rotation, speed 43000 rpm, locked rotor current
45A, rated voltage 11.1V
.Super magnetic blocking torque up to 1520g-cmc, double ball bearing reduces friction, quick start, high
efficiency operation
.The sound is crisp and delicate, eliminating the irritating squeak and able to withstand continuous launch
without reducing the initial velocity
.Suitable for Nerf Stryfe/Nerf Rapidstrike CS-18/Worker Swordfish

.Attention: 
1.The product is suitable for people over 14 years old
2.When using the fully automatic kit + sintering motor, please follow the tutorial plus the FET/motor governor,
otherwise it may burn out the micro switch or motor
3.The motor should be handled with care, and if it falls or falls too much, it may damage the motor
4.The battery cannot use lithium iron phosphate battery (explosion may occur due to use), and only lithium
polymer batteries can be used. The voltage is recommended to use 11.1V, the battery discharge capacity is
25C-60C
5.Never put it in an open flame or expose it to the sun
6.The motor can't be blocked, the danger of burning the motor is blocked, and the battery may explode.
7.Distribution gasket function: Since the motor is a double ball motor, the ball washer on the motor will
protrude slightly less than the ordinary motor, so that the groove of the flywheel and the ballistic concentric
shaft of the bin are not level, the accuracy will be biased; after adding the gasket Avoid this phenomenon, so
that the groove of the flywheel is flush with the concentric axis of the flywheel bin

Specifications:

.Color: Titanium
.Material: NdFeB Double Ball
.Product Dimensions: 2.02*1.52*3.05cm
.Product Weight: 70g
.Package Dimensions: 10*6*3cm
.Package Weight: 100.4g
.Packing: Box

Package Content:

.2 x Motor
.1 x Wire
.1 x Tips
.2 x Plastic Gasket