Home Appliance Storage Holders Racks Pegboard Hanging Plate Tool Shelf Organization Kitchen Bathroom Organizer for Wall

Specifications:

Overall size:28*28*1.2cm
color: White/Wood /Black
Upper and lower hole distance:2.5cm
Hole width:0.5cm
Hole length:1.5cm
Left and right hole distance:1.5cm

Features:

1. Strength and load-bearing
–Not easy to fall, safe to use, high bearing capacity, strength and load bearing can be seen

2. Improve space utilization
–It's not that the space is not enough, but that the space is not used, and the space is used skillfully

3. Installation without drilling
–Traceless adhesive/removable/easy to clean

4. Moisture-proof and waterproof
–Not easy to slip off bathroom/kitchen available

5. Removable for cleaning
–No trace adhesive/removable/easy to clean

6. Ready to use
–On-demand DIY space to master

Installation steps:

1. Install the back glue and the perforated board
⒉Tear off the adhesive after checking the direction
3. Paste according to the direction indicated by the adhesive label on the board (the adhesive buckle faces upward)
4. Remove the perforated plate (push it upwards), and then squeeze out the air from the adhesive
5. Align the board and push it downward into the slot to secure it.
6. It can be used after 12 hours of rest.

Installation Precautions:

Please be sure to install the perforated board in the direction of the non-marking sticker (the arrow on the board points). Remember not to install the hole horizontally.
1. Flat painted walls, ceramic tiles, glass, wooden boards, and PVC boards that do not peel off or peel off can be installed without drilling holes. During installation, you need to avoid the gaps in the ceramic tiles and stick them. Wallpaper cannot be installed without drilling holes.
2.When installing the self-adhesive sticker on the hole board, the buckle and the slot may be loose.
After the point paper is pasted, remove the paper and throw it away.
3. Don't stick it too tightly when installing, stick it a little bit, take down the board and align it, then stick it firmly.
4. After installation, remove the board, scrape the adhesive back firmly without leaving any air bubbles, and use it after standing for 12 hours. The nails delivered at the same time can be selectively used according to the actual situation on site, please strictly follow the installation tutorial steps to install.

No punch surface
Suitable for smooth glass, smooth metal, smooth tile, marble surface, frosted glass concave-convex mud wall, antique brick wall, etc.

perforated surface
Painted walls, plaster walls, etc.